Mobile Home Setup and Transport in Randolph County, NC
- Single-wide move within NC — $3,000–$8,000
- Double-wide move within NC — $7,000–$15,000
A typical range to plan with; your real number comes from the quote.
Tell me about your project. The quote is free.
I'll call you to learn about your project, then give you one price in writing for the work.
Prefer to talk?Call now8 AM–8 PM
Need a setup contractor for a home in Randolph County? Tell us whether the home is already on the property or still needs transport.
You can run this project yourself with the right help. We quote the work and do it, while you stay in charge of the decisions.
How it works
Tell us the job. Share your destination ZIP, timing and whether you need transport, setup or both. Add the pickup location when the home needs to move.
I call you. I call you to learn about the job, then give you one price in writing for the work.
One contract, start to finish. You decide whether to hire us. One contract and one dedicated person, from the quote to the final inspection.
Make the scope clear before booking
Tell the contractor what your seller or another contractor has already agreed to do. Ask who handles the work at each site, transport arrangements, setup and inspection coordination. For a double-wide, ask who takes responsibility for joining the sections and the interior trim-out.
For the wider project, keep track of site preparation and poured footers, transport and setup, utility connections, trim-outs, decks, the foundation, and inspections. Select only the extra jobs you need help with. Some work may already be covered.
Your local permit-office starting point
Randolph County — Building Inspections.
Ask Central Permitting how the destination property review and setup inspection fit together. Bring the parcel details and any existing project paperwork.
Confirm the responsible county or town office for the property. Ask the contractor to distinguish transport paperwork from installation review and to identify who handles each before you agree on the schedule.
Randolph County: permits, setup inspections and zoning
Permits, in the order Randolph gives them
- Zoning comes first. Randolph's Central Permitting office names the zoning permit as the first development permit; where a town's zoning covers the site, the town issues it.
- Environmental Health clearance is taken to Central Permitting before development permits are issued. Find out whether the land uses septic and a well or public water and sewer; the county does not say every site needs a well.
- The county Tax office issues a manufactured-home tax certification, and the setup guide warns that permits are delayed without it.
- The setup permit application asks for the home's make, model, length, width and bedrooms, the park name and lot when the home goes in a park, and the moving and setup contractor's license number.
- Electrical, heating and air, and plumbing each need their own permit before inspection. An outside air conditioner or heat pump needs a mechanical permit, and an owner may not do the wiring on a home that will be rented.
What the setup inspector looks for
- At the setup inspection every permit has been issued, the tie-downs, blocking and connections are ready, the sewer connection is left visible, and the steps, rails and address are in place.
- With masonry underpinning, anchors and blocking are inspected before the masonry goes up, and again after it is finished and before the power is released. Masonry is laid with mortar; rock is backed with block.
- The plumbing connection at the septic tank has to be visible to the inspector.
- Before power is released, any old home being replaced is gone and the required underpinning is complete.
- Book inspections with the area inspector by midnight the day before, with the permit number, or through ePermits. Inspectors answer the phone from 8 to 9 a.m. and 4 to 5 p.m.
Zoning rules that come up on Randolph land
- Single-wide and double-wide homes are allowed by right in the RA (Residential Agricultural) and RM (Residential Mixed) districts and need conditional approval in E-1. CS, HC, HI, LI, OI and RE do not allow them, and RR has definition wording the county itself has to reconcile.
- The base minimum lot is 40,000 square feet, or 80,000 in a water-quality critical area, and a lot with less than 100 feet of state-road frontage needs 5 acres. In E-1, RA and RM the filed setbacks are 35 feet front, 10 feet side and 30 feet rear, with a 100-foot lot width.
- Section 626 of the ordinance says zoning cannot exclude a home because of its age and cannot require masonry skirting on land the homeowner leases. Neither rule decides whether a particular home or site qualifies.
Randolph offices
- Central Permitting, 204 E. Academy Street, Asheboro: Building Inspections 336-318-6565 (permit help 336-318-6595), Planning and Zoning 336-318-6555, Environmental Health 336-318-6262, Addressing 336-318-6551. Building Inspections is open 8 a.m. to 5 p.m., Monday to Friday.
Where these county facts come from
- Randolph County Central Permitting — checked 2026-10-21
- Randolph County mobile-home setup requirements (revised April 28, 2023) — checked 2026-10-21
- Randolph County inspection scheduling — checked 2026-10-21
- Randolph County Unified Development Ordinance — checked 2026-10-21
Questions
Can I request setup without transport?
Yes. Choose setup only and explain whether the home is already on the property or transport is arranged. Tell the contractor which parts of the installation remain in your scope.
Can I request help with a used mobile home?
Yes. Share what you know about the home, its present location and the destination. Ask the contractor to assess the proposed move before you commit to a transport date or assume the home can be relocated.
Where should I start with a Randolph County permit question?
Start with the office linked above and provide the destination address or parcel, home type and proposed work. Ask whether it handles that property and what information it needs to discuss your setup. A quote request does not establish permit approval or permission to place the home.
Does a transport quote include the complete setup?
Ask for each responsibility and exclusion in writing. State whether you need transport, setup or both, and ask which other trades you must arrange. Compare quotes against the same scope instead of assuming every contractor includes the same work.
Is the request free, and do I have to hire?
The quote is free. You decide whether to hire us after we go over the job and the price.
Ready to arrange your transport or setup?
Tell us what you need in Randolph County, what is already arranged and when you want to get started.
Get my free quote