My Manufactured Home Guide

Skirting cost

What should a vinyl skirting installation quote include?

Vinyl skirting is priced from two measurements — the perimeter and the height — plus trim, vents and doors. Get those on the quote and two prices become comparable.

Short answer: Ask whether the price is materials only or installed. An installed quote should list the panels, top and bottom trim, access doors, vents, labor and haul-off.

Reviewed by a manufactured home setup contractor and dealer.

Tell me about your project. The quote is free.

I'll call you to learn about your project, then give you one price in writing for the work.

Phone or email — I need one to reach you
What do you need? Tap any that apply (optional).

You'll hear directly from me — the same person from the quote to the keys.

Prefer to talk?Call now8 AM–8 PM

What to check first

Start with the exact property, quote, record, or job detail behind your question. Mark what is confirmed, what still needs a current source, and who must answer it. Use the checklist to keep the next call, document, or decision clear.

Perimeter (feet) and height (inches) the panels are cut to

Panel count, plus top and bottom trim (rails) in feet

Access doors and vents: how many

Ground preparation, labor, and hauling off old skirting

Step 1

Home dimensions, height above grade, number of sections, porch or deck locations, and site photos.

Step 2

Inspection status and confirmation that setup, utilities, corrections, and required access are complete.

Step 3

Desired color and profile plus known vents, doors, HVAC lines, pipes, wiring, and other penetrations.

Details to Sort

The checks that usually matter before you commit money.

Materials only or installed

A materials-only price is the panels, rails, doors and vents. An installed price adds labor, fitting around steps and utility lines, and cleanup. Make sure two quotes are the same kind before comparing them.

What it costs

Vinyl skirting materials, US figures checked October 2026: about $6–$9 per linear foot — roughly $900–$1,500 for a typical single-wide kit. Installed on a single-wide: about $1,000–$3,000. A typical range to plan with — your real number comes from a written quote for your home.

Tell us the job and where the home is. I'll call you, then give you one price in writing for the job.

Secondary Support

Need more help understanding your situation?

Not sure what work you need? Call now (8 AM–8 PM) or send the request: the quote is free, and the person who quotes your project runs it.

Free quote

Ask about vinyl skirting

Share a few details to get an immediate starting point, likely next steps, useful guides, and relevant contractor categories. You do not need to know the exact permit or contractor type yet.

Add more project details (optional)

These details can help, but you can leave this closed if you are not sure yet.

Prefer to talk?Call now8 AM–8 PM

Common questions

How much does installed vinyl skirting cost?

It depends mostly on the perimeter and the height — see “What it costs” on this page. Your number comes from a written quote for your home.

What is included in a materials-only vinyl skirting price?

The panels, top and bottom rails, access doors and vents — no labor, no ground work, no haul-off.

How do home height and perimeter affect the quote?

The panels are cut to the height and run the full perimeter, so more of either means more material and more labor.

Are access openings and trim included?

They should be listed. If doors, vents or trim are not on the quote, ask before you sign.

Can I have a vinyl skirting quote checked for free?

Yes — send it through the quote check on this page and we take an honest look at what it includes and misses.

Call now· 8 AM–8 PM