Power planning before delivery
Confirm the serving utility and proposed service path early. Existing lines or a nearby pole do not establish capacity, responsibility, connection location, cost, or schedule for the specific project.
Power and Service Readiness
Electric service for a mobile home in North Carolina
Electric service for a mobile home should be planned with the utility, site, home, setup schedule, electrician scope, and inspection path. Power distance and responsibility can affect readiness before and after delivery, and the utility and county paperwork will call the home a manufactured home.
Short answer: Use the official North Carolina service-area information only to identify a likely utility, then ask that utility to confirm the parcel and proposed manufactured-home location. Submit the address or parcel, current site plan, requested temporary or permanent service, proposed meter or service location, load or home information the utility requests, route constraints, and project timing. Preserve the dated response, application or work reference, service point or route information, utility-side scope, customer responsibilities, prerequisites, charges or allowances stated by the utility, and unresolved field-review items. Only then ask site-work and licensed electrical providers to quote their separate parts.
Reviewed by a manufactured home setup contractor and dealer.
Manufactured Home Land Check
Buying land for a mobile home? The Land Check reads the county's own permit rules for the one parcel you give us, and says where each answer came from and when.
$125. Asking takes no payment and places no order.
What is true in North Carolina
- Electrical contracting in North Carolina requires a State licence. G.S. 87-43 states that no person, partnership, firm or corporation shall engage, or offer to engage, in the business of electrical contracting in the State without having received a licence.
- NC General Statutes, G.S. 87-43 · checked 2026-08-30
- The permits required by the North Carolina State Building Code must be secured before the work starts. G.S. 160D-1110 states that no person shall commence or proceed with construction, reconstruction, alteration or repair without first securing them.
- NC General Statutes, G.S. 160D-1110 · checked 2026-08-30
- The set-up of a manufactured home in North Carolina must be performed by a set-up contractor licensed by the NC Manufactured Housing Board. Employing an unlicensed person to perform set-ups is a ground for denial, suspension or revocation of a licence under G.S. 143-143.13.
- NC General Statutes, G.S. 143-143.13 · checked 2026-08-30
What to check first
Start with the exact property, quote, record, or job detail behind your question. Mark what is confirmed, what still needs a current source, and who must answer it. Use the checklist to keep the next call, document, or decision clear.
Utility work, licensed electrician work, setup coordination, trench or route work, and inspection release can be separate responsibilities.
Temporary construction power and permanent home service are different questions and may follow different timing.
The guide does not provide electrical instructions, quote power costs, guarantee timelines, or act as an electrician or utility.
Step 1
Identify the utility provider, property address, existing service, proposed home location, distance or route concern, and project stage.
Step 2
Ask the utility and qualified electrician who handles each service, meter, pole or pedestal, trench, connection, and inspection category.
Step 3
Coordinate the power plan with delivery, setup, HVAC, plumbing, final connection, startup, and inspection timing.
Details to Sort
The checks that usually matter before you commit money.
Temporary versus permanent power
Temporary construction power and permanent home service can serve different stages. Ask what the setup crew and trades need, what can be inspected, and when the utility can energize approved work.
Utility, electrician, and setup boundaries
The utility may control one side of the service while a licensed electrician handles customer-side equipment or connection. The setup provider may coordinate timing without performing every electrical scope.
Meter, pole, pedestal, and route questions
Metering location, pole or pedestal, overhead or underground route, trenching, conduit, easements, and distance should be discussed at a high level with the utility and qualified professionals, not designed from this page.
Final connection, startup, and inspection
After the home is set, electrical connection can affect HVAC startup, utility release, inspection corrections, and final completion. Confirm the order with the responsible local parties because it can vary.
Create the service-request record before comparing quotes
Record the likely and confirmed serving utility, utility type, parcel and service address, proposed home and meter location, temporary or permanent stage, application or work reference, utility contact channel, dated response, service point or route status, utility-owned work, customer-owned work, stated charges or contribution rules, site prerequisites, inspection and release steps, and every unresolved condition. State sources describe regulatory lanes and line-extension starting points; the utility controls the property-specific answer.
Separate the utility, excavation, and electrician handoffs
Put utility extension or service work, clearing or access, trench or conduit responsibility, meter or service equipment, customer-side feeder and home connection, permits, inspections, corrections, release, energization, restoration, and return visits on one responsibility sheet. Ask qualified parties to define their own scopes. This guide provides no route, depth, equipment, wiring, code, or construction instruction.
Temporary service and permanent service need separate rows
Record why temporary power is requested, who applies, the utility's current requirements, the meter or service-equipment boundary, site and access prerequisites, licensed electrical scope, permit and inspection, stated charges, use period, protection, removal, reuse, and transition to permanent service. Do not infer equipment or construction details from another utility or project.
Compare the meter and electrical quote without losing the release path
Ask every quote to identify the dated utility response it relies on; utility-owned work; customer meter or service equipment; trench or conduit work by others; feeder and home connection; HVAC or setup dependencies; permits; inspection requests; corrections; local release communication; utility energization; restoration; return visits; allowances; and exclusions. Review My Quote can organize written scope, while a Manufactured Home Land Check remains the property and utility-path action.
Manufactured Home Land Check
Organize the parcel, site-plan, utility-territory, service-distance, route, and dependency questions before treating power as available or priced.
Secondary Support
Need more help understanding your situation?
Use the project router first, then share details for review if you still need help organizing the project context. This does not guarantee a provider match or availability.
If this is your situation
A utility service response or work request exists
The record may still leave the approved service point, utility contribution, route, easement, site work, customer equipment, temporary service, inspection, release, charge, or schedule conditional on field review and other project milestones.
Next step: Give the same dated utility response to the electrician and any site-work provider, and require each quote to show which utility assumptions it uses and which responsibilities remain outside its scope.
The quote includes a temporary pole, meter base, or pedestal
A named item does not establish who specifies, owns, supplies, installs, permits, inspects, maintains, removes, or reuses it. Utility requirements and customer-side licensed work can be separate.
Next step: Ask the serving utility and licensed electrician to mark each responsibility, prerequisite, charge, allowance, inspection, release, removal, and permanent-service handoff in writing.
Common questions
Who provides electric service to a manufactured home?
The serving utility and a licensed electrician may each handle different parts, with setup and inspection coordination around them. Confirm responsibility for the actual property and project.
How much will it cost to run power to the home?
Distance alone does not determine cost. Utility rules, route, service design, equipment, trenching, site conditions, electrician scope, and inspections can all matter. Obtain project-specific information from qualified parties.
Will a contractor always be available near me?
No. Availability varies by county, city, trade, schedule, and project scope. We can help you understand which contractor category may be needed and route the request with better project details.
Should I call a regular contractor or a manufactured-home contractor?
It depends on the work. Some licensed trades can help with standard electrical, plumbing, HVAC, decks, or grading work, while setup, transport, skirting, tie-down, and inspection-related items may need manufactured-home-specific experience.
Can My Manufactured Home Guide tell me if my land will work?
We can help you organize the early questions around zoning, access, utilities, septic, well, grading, delivery, and setup so you know what to verify before spending more money.
Do I need to own land before asking for help?
No. Many people reach out before buying land so they can understand what to check before they commit to a parcel.
Is mobile home the same thing as manufactured home?
Many people use the terms interchangeably. Manufactured home is the modern professional term, but mobile home is still common in search, county records, and everyday conversations.
Official sources
Each link was checked on the date shown. The office that issued it decides your parcel, not this page.
- North Carolina Public Staff Electric Section
North Carolina state source · checked 2026-08-31
Current official source distinguishing regulated utilities from cooperatives and municipal providers and linking service regulations and line-extension plan starting points.
- North Carolina Utilities Commission electric industry
North Carolina state source · checked 2026-08-31
Official state electric-industry source. The serving utility still confirms territory, service, design inputs, charges, and schedule for the parcel.