North Carolina County and Code Starting Points

Alamance County Manufactured Home Starting Points

Alamance County publishes an inspections policy that names the manufactured-home inspections which may be requested and states, item by item, what must be complete and ready at the setup and final visits. It answers the inspection half of the project and not the permit path, and this page keeps that boundary.

Manufactured Home Land Check

Will this Alamance County land take a manufactured home? Find out before you commit to buying the land, or the home.

Buying land, already own it, or selling it — one report on what the county and the land will allow.

Check this land

Need a set-up crew, poured footers or skirting in Alamance County?

One request, free for you. Pick the work:

Project Roadmap, Cost and Next Steps — Planning the whole project? Costs, stages and who does what.
Review My Quote — Have a quote in hand? Included, missing, unclear—and what to ask.
Project Consulting — Want to talk it through? An experienced set-up contractor and dealer.

Common Questions

Mobile homes in Alamance County, answered from the county's own sources.

Can I put a mobile home on my land in Alamance County?

What inspections does a mobile home need in Alamance County?

The county names the inspections that may be requested. The notice states that only the following inspections may be requested, and it applies to all homes permitted on or after July 1, 2017. Source: Manufactured Home Inspection Policy, reviewed 2026-09-08.

Manufactured Home Placement Questions

Start with what the sources actually support.

Do I need a permit for a mobile home in Alamance County?

A closed list: the county names the inspections that may be requested

A site inspection before the home is set, not after

An infiltration inspection for multi-section homes only, with the end walls left open

A poured footing inspection for the home or decks, carrying an additional $50.00 fee

Tracer wire for the sewer named as a setup-inspection item, with trenches left open

Footing for skirting poured or placed before the setup inspection where masonry skirting is used

House numbers, covered trenches and finished grading named as final-inspection items

Smoke detectors present and operational at the final

Alamance County Local Process Guide

Official-source-backed starting points and questions to verify.

These sections organize the public source links already reviewed for this page. Where a source does not answer a project-specific question, the item is framed as something to ask the county, AHJ, utility company, licensed professional, dealer, setup contractor, or responsible provider.

A closed list

The county names the inspections that may be requested.

The notice states that only the following inspections may be requested, and it applies to all homes permitted on or after July 1, 2017.

A site inspection prior to setting the home.
An infiltration inspection, multi-section homes only: home blocked and anchored, bolted and gasketed, end walls left open for inspection, interior connections completed, and access provided to the interior by stairs or a proper ladder.
A poured footing inspection for the home or decks, for which the county states an additional $50.00 fee applies.
A setup inspection.
A manufactured home final.

Ready to inspect

What must be complete at the setup inspection.

The county lists these as items that must be complete and ready to inspect at the time the inspection is requested.

Well and septic trenches left open, with wire and plumbing in place, including tracer wire for the sewer.
Home blocked and anchored, for single-section homes.
Electrical service installed and connected to the home.
Supply and drain plumbing installed, with the necessary tests in place.
Dryer vent and crossover ducts installed, if applicable.
Footing for skirting poured or placed, if masonry skirting is to be used.

Ready to inspect

What must be complete at the manufactured home final.

The same standard applies: complete and ready to inspect at the time the inspection is requested.

Stairs, stoops and decks installed.
Trenches covered, grading done, house numbers installed, and the sewer and water line covered.
Skirting installed, if skirting is used.
Inside electrical panel wiring complete, and smoke detectors present and operational.

Local Prerequisites To Verify

Environmental health, utilities, zoning, and access may shape the sequence.

Septic approval or existing-system review

County sources often require septic approval, construction authorization, or existing-system authorization before or alongside manufactured-home permitting.

Septic

Well or water availability

County sources may require well, public water, or water-sewer tap documentation before a permit can move forward.

Well Plumbing

Water/sewer availability

Some county sources ask for sewer approval, tap receipts, or public water documentation when applicable.

Plumbing Septic Well

Utility service availability

Some county sources connect power release or final readiness to completed trade inspections or utility-provider steps.

Electrical HVAC Propane / Gas

Zoning or land-use review

County sources may require zoning, municipal zoning, watershed, floodplain, or land-use review before manufactured-home placement.

Engineering

Driveway or access

Driveway, access, or delivery-route questions belong in the library only where county or source-backed process notes make them relevant.

Driveway Improvement Grading and Site Preparation Transport and Setup

Inspection-Related Scopes

Limited to source-backed manufactured-home scopes.

Grading and Site Preparation

Use only where source-backed county or state guidance ties grading to pad, drainage, foundation readiness, access, footers, or setup readiness.

Several county sources reference site grading, drainage, footings, setup readiness, or documents needed before power or final signoff.

Transport and Setup

Core manufactured-home installation scope for delivery, setup, pier/blocking, anchoring, tie-downs, setup contractor information, and inspection readiness.

The NC Installation Manual is the primary statewide installation source; county manufactured-home process pages may add local setup contractor, permit, and inspection steps.

Electrical

Electrical service, site-installed electrical work, utility handoffs, and inspection readiness when source-backed.

County sources commonly separate electrical permits or inspections for mobile/manufactured-home setup.

Plumbing

Plumbing connections, water and waste lines, pressure or water tests, and final readiness where source-backed.

County sources commonly separate plumbing permits or inspections for mobile/manufactured-home setup.

HVAC

Mechanical systems, heat pump or air-conditioning work, ducting, and final readiness where source-backed.

County sources commonly reference mechanical permits or inspections for mobile/manufactured-home setup.

Propane / Gas

Use only when official guidance mentions gas service, gas appliance connections, LP systems, fuel-gas inspection, pressure testing, shutoffs, or installation-manual requirements.

Onslow County explicitly groups gas fuel work with prescriptive code and NC manufactured-home regulations for manufactured-home permits.

Decks / Stairs / Landings / Handicap Ramps

Egress, steps, landings, handrails, ramps, deck thresholds, and final access readiness where source-backed.

County manufactured-home guides may reference stoops, steps, landings, handrails, and deck-size thresholds.

Masonry / Block / Foundation

Footings, piers, blocking, masonry skirting/foundation presentation, soil bearing, anchorage, and foundation readiness where source-backed.

County sources reference footings, piers, blocking, anchorage, soil bearing, tie-downs, or foundation-related items in inspection processes.

Vinyl Skirting

Skirting or underpinning only where source-backed guidance connects it to inspection timing, access, ventilation, appearance, or placement requirements.

County manufactured-home inspection documents may reference skirting timing, access panels, or underpinning requirements.

Trim-Out / Carpentry

Use only where official guidance touches final trim-out, marriage line completion, close-up, access panels, finish details, weatherproofing, or readiness for final inspection.

Onslow County references marriage wall inspection for multi-wide homes and close-up type items within manufactured-home setup inspections.

Questions To Ask The County

Bring better questions to the right local office.

Which of the named inspections apply to this home — is it single-section or multi-section?

Is a poured footing being used for the home or the decks, and does the additional $50.00 fee apply?

Are the well and septic trenches to be left open, with wire and plumbing in place, at the setup inspection?

Is masonry skirting planned, and does the skirting footing have to be poured before the setup inspection?

What issues the permit and what approvals come first? This document covers inspections only.

Dealer Quote Responsibility Questions

Ask who owns each step before the project depends on it.

Who requests each of the named inspections, and who confirms the site is ready before the request?

Who is responsible for leaving the well and septic trenches open with the tracer wire in place?

Who pours or places the skirting footing, and is it scheduled before the setup inspection?

If a poured footing is used, who pays the additional $50.00 fee?

Who installs the house numbers and completes the grading before the final?

Who obtains the permit? This county document is about inspections and does not say.

What To Gather

Better details make county and provider questions clearer.

Property address and parcel number.

Whether the home is single-section or multi-section, which decides whether the infiltration inspection applies.

Whether the home or the decks will use a poured footing.

Whether skirting will be masonry, which brings the skirting footing into the setup inspection.

Whether the site is on well and septic or on public water and sewer.

The date the home was or will be permitted — the policy applies to homes permitted on or after July 1, 2017.

Related provider types

Transport and Setup Electrical Plumbing Masonry / Block / Foundation Decks / Stairs / Landings / Handicap Ramps Septic Well Grading and Site Preparation

Related project stages

Permits, Septic, and Utilities Preparing Your Land Setup and Installation After Installation / Move-In

Source notes

The document is dated by its own text — 'EFFECTIVE JULY 1, 2017' — and is addressed to manufactured home dealers and set-up contractors rather than to homeowners. It is the county's statement of its inspection procedure, not a homeowner guide, and it must be reconfirmed with the department before being relied on.

SCOPED HONESTLY: this document covers inspections. It does not state the permit path, the zoning approval, the Environmental Health step, or any fee other than the $50.00 poured-footing fee, and this page does not supply them from elsewhere.

The county's list of inspections that may be requested is quoted as the county states it. Whether a particular home needs all of them is a determination the Inspections Department makes.

No project approval, inspection result, or utility-release outcome is implied.

Helpful Next Steps

Move from Alamance County questions into the right My Manufactured Home Guide path.

Use these pages to organize the next question by stage, responsibility, utility path, setup readiness, or private project summary. They do not replace county, utility, AHJ, or professional confirmation.

Setup and inspection readiness

Organize setup, utility, skirting, deck, trim-out, correction, and inspection questions.

Manufactured-home permit order

Separate land-use, Environmental Health, permit, setup, trade, and utility-release lanes.

Source Hierarchy

State installation guidance first, then local process.

The NC Installation Manual sets how a home is installed statewide. Alamance County's own offices set the permit steps, zoning, septic and inspections.

NC installation guidance

primary statewide installation source

Primary statewide installation source: NC Installation Manual

Primary statewide installation source for North Carolina manufactured-home installation requirements, published as the State of North Carolina Regulations for Manufactured Homes.

state program authority

State program authority: NC OSFM Manufactured Homes

Official state manufactured-homes program landing page and document hub; use the NC Installation Manual for installation-specific requirement details.

state program authority

State program authority: NC OSFM Manufactured Building

Official NC OSFM manufactured building division page for manufactured and modular housing resources.

local process source

Alamance County local process sources

County and local AHJ sources explain local process layers; they do not replace statewide installation guidance or project-specific authority.

County Links and Source Notes

Official source links reviewed for this page.

We organize Alamance County's own sources. Rules change — confirm them with the county before you rely on them.

local process source

Local process source: Manufactured Home Inspection Policy

Inspections Department notice to manufactured home dealers and set-up contractors, headed 'NEW PROCEDURES IN MANUFACTURED HOME INSPECTIONS — EFFECTIVE JULY 1, 2017', stating that only five named inspections may be requested and listing what must be complete at the setup inspection and at the manufactured home final. It is addressed to the trade rather than to homeowners.

Responsible authority / official host: alamancecountync.gov
Purpose and coverage: local process source
Last verified: 2026-09-08
Link health: Verified when reviewed; reconfirm the current page or form before relying on it.
Fallback status: Direct local-process starting point

Manufactured Home Land Check

Will this Alamance County land take a manufactured home? Find out before you commit to buying the land, or the home.

Buying land, already own it, or selling it — one report on what the county and the land will allow.

Check this land